Solis On Grid Växelriktare
Stödda Enheter
| Device Type | Modbus TCP (Ethernet) | RS485 | Curtailment |
|---|---|---|---|
| S5-GR3P(3-20)K | ✅ (endast med Solis datalogger) | ✅ | ✅ |
| S5-GC(25-40)K | |||
| S5-GC(50-60)K | |||
| S5-GC80K | |||
| S5-GC(100-110)K | |||
| S6-GR1P(0.7-3.6)K-M | |||
| S6-GR1P(2.5-6)K | |||
| S6-GR1P(7-8)K02-NV-YD-HC | |||
| S6-GC3P(40-60)K-NV-ND | |||
| S6-GC(80-125)K | |||
| S6-GC3P150K07-NV-ND | |||
| S6-GU350K-EHV | |||
| 100-125K G5 | experimentell | ||
| Solis-80K-5G-PRO | ✅ (endast med Solis datalogger) | ||
| Solis-255K-EHV-5G-PLUS |
Värdeschema
RS485
NOTE: RS485 Device Addresses
- You MUST give each device on the RS485 bus a unique address. Check the manual of the device on how to do this.
- Use lower addresses first (1, 2, ...) because the SmartgridOne Controller will find them faster!
- For each device, it is generally recommended to stick with the factory default baud rate, parity, and stop bits. The SmartgridOne Controller will scan on those first.
| Modell | Försäljningspris |
|---|---|
| S5-GR3P(3-20)K | Kopplingsschema för S5/S6 Serien |
| S5-GC(25-40)K | |
| S5-GC(50-60)K | |
| S5-GC80K | |
| S5-GC(100-110)K | |
| S6-GR1P(0.7-3.6)K-M | |
| S6-GR1P(2.5-6)K | |
| S6-GR1P(7-8)K02-NV-YD-HC | |
| S6-GC3P(40-60)K-NV-ND | |
| S6-GU350K-EHV | |
| 100-125K G5 | Kopplingsschema för industriell PV-installation |
| Solis-80K-5G-PRO | |
| Solis-255K-EHV-5G-PLUS |
Som standard är växelriktaren inställd på adress 1. Detta kan ändras via växelriktarens display. Du kan hitta proceduren i kapitel 7.3.2 i manualen.